![]() ![]() In short, the 7.3 Powerstroke Injection Pressure Regulator controls the high-pressure oil pump’s outlet pressure. Helps Seal in IPR valve body created HPOP oil pressure. Seals the IPR valve body to the oil channel, holding the pressure in the HPOP. NOTE: This is a 7.3 Common Leak Location and one of the first places to check if your 7.3 HPOP is leaking. When the IPR is screwed into the HPOP this forms the seal between the 7.3 IPR and the 7.3 HPOP. 7.3 IPR SpacerĪllows the IPR to have its required length. The Tinnerman, or “tin nut” as it’s commonly called, is a 1/2″ x 20 fine threaded nut. Is a thin sheet metal retaining nut designed to hold the 7.3 Injection Pressure Regulator solenoid in Place. ![]() ![]() Here’s a detailed diagram of all the parts on a 7.3 Injection pressure regulator. 7.3 IPR – Injection Pressure Regulator Parts And the 7.3 HPOP is located under the fuel filter housing. Your 7.3 Powerstroke’s IPR is located in the center of the engine compartment, screwed into the lower right rear of your high pressure oil pump-HPOP. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |